MIMAKI JV4 Series, Operation Manual

Page: 62 / 152

- 1.44 -
SETTING A BOARD MEDIUM ON THE DEVICE
Unlike a paper roll, the board medium need not be fixed onto the roll holders. The board medium
may be set on the device either from the front or back of the device.
• Adjust the head height before setting the board medium on the device.
(See page 1.34)
• Prepare stands for preventing the board from hanging down.
(See page 1.33)
• When the board is used, set [BOARD] detection to ON. (See page 3.17)
STEP
1. Open the front cover.
2. Push up the clamp lever.
The clamp lever may be either the one at the front or the one
at the back of the device.
3. Insert the board between the pinch roller and
the platen.
Prepare a board support bench with the same height as the
platen.
Main unit
Board
Stands for
preventing
the board
Stands for
preventing
the board