MIMAKI JV4 Series, Operation Manual

Page: 90 / 152

- 3.10 -
CUTTING OFF THE MEDIUM AUTOMATICALLY AT THE END OF PLOTTING
[AUTO CUT]
This function cuts off the medium automatically at the end of plotting.
If AUTO CUT is not specified, the device plots the next plotting data after plotting the current data,
without cutting off the medium.
Even if AUTO CUT is not specified, you can cut off the medium by hand. (See page 2.7)
• If the head height is 3mm or more, [AUTO CUT] is not possible.
ON : The medium is cut off automatically at the end of plotting.
OFF : The medium is not cut off automatically even after the plotting
is completed.
STEP
1. Select a type.
(see page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display gives
the indication [AUTO CUT].
4. Push the [ENTER] key.
5. Select a Cutting off the medium automatically
or not, by pushing the JOG keys [ ] and [ ].
Here, select [ON].
6. Push the [ENTER] key.
• You can set a time interval between the instant
at which the plotting is completed and the instant
at which the automatic cutting is started, by
using the procedure for setting the ink drying
time. (See page 3.9)
7. Push the [END] key twice, and the menu returns
to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
AUTO CUT
< ent >
TYPE.1
AUTO CUT
: OFF
TYPE.1
AUTO CUT : ON
TYPE.1
AUTO CUT
< ent >
<< LOCAL >>
width : 1272mm