Page 50
Operation
confocalDT 24x1
Fig. 36
Measurement
web page (thickness measurement)
The
Measurement
web page visually and numerically displays both distances and the
thickness (difference 1/2), intensity is displayed for both peaks (peak 1 = close, peak 2
= far), see
. Statistic values relate to thickness. All other settings and features are
identical with those for distance measurements, see Chap.
5.7
Load / Save Settings in the Controller
In this menu you can save current device settings to the controller and recall stored set-
tings. You can permanently store eight different parameter sets in the controller.
confocal
DT
2451
Settings loading / saving
Login
Measurement program
Sensor
Averaging/error handling
Zeroing/mastering
Exposure mode/measuring rate
Detection threshold
Material database
Switching outputs
Analog output
Digital interfaces
Output-data rate
Encoder inputs
Trigger mode
Synchronization
1
Home
Preferences
Measurement
Video signal
Help/Info
Preferences > Settings loading / saving
Setup no.:
Status:
OK
Settings loading/saving
Manage setups on PC
Extras
Store settings in the controller permanently (otherwise the settings will be lost when turning off). Various
parameter sets can be stored. When turning on, the last stored parameter is loaded.
Save setup
Activate
Maintaining interface settings:
Maintain interface settings
If the checkbox is activated, the settings for language, password, analog output and network will kept.
Activate
By clicking this button, the selected setup file is loaded in the controller.
Save setup
Clicking this button saves the settings in the selected setup file.
Manage setups on PC
Importing/exporting of setup and material settings between PC and controller.
Save Setup
