Page 105
Appendix |ASCII Communication with Controller
confocalDT 24x1
A 5.4.5.5 Reset the Statistics Calculation
RESETSTATISTIC
Reset the statistics (of the current min and max value).
A 5.4.5.6 Selection of the Signal for the Mastering / Zero Setting, Multilayer
Measurement
MASTERSIGNAL DIST1|DIST2|DIST3|DIST4|DIST5|DIST6|THICK12|
THICK13|THICK14|THICK15|THICK16|THICK23|THICK24|THICK25|
THICK26|THICK34|THICK35|THICK36|THICK45|THICK46|THICK56
Information of the signal for which the mastering or the zero setting should be applied.
The distance or the difference 1-2 is used in the distance or thickness measurement
mode. The free selection of the signal is only possible in the measurement program
multilayer measurement.
A 5.4.5.7 Setting Masters / Zero
MASTERMV NONE|MASTER <Master value>
-
NONE: Reset the mastering
-
MASTER: Setting the current measurement value to the master value
-
Master value: Master value in millimeters (min: -measuring range, max: +measuring
range)
In case of master value is 0, then the mastering function has the same functionality as
the zero setting. The master command awaits the next measurement value a maximum
of 2 seconds and uses it as master value. If no measurement value is received within
this time, for example, by external triggering, the command returns with the error “E32
Timeout“. The master value is processed with six decimal places.
A 5.5
Data Output
A 5.5.1 General
A 5.5.1.1 Selection Digital Output
OUTPUT NONE|RS422|ETHERNET|ETHERCAT
-
NONE: No measurement value output
-
RS422: Output of measurement values via RS422
-
ETHERNET: Output of measurement values via Ethernet
-
ETHERCAT: Output of measurement values via EtherCAT
A 5.5.1.2 Output Data Rate
OUTREDUCE <Output reduction> [ANALOG|RS422|ETHERNET|NONE]
Reduces the measurement value output for all available interfaces.
-
1: Output each measurement value
-
2...1000: Output of each n-th measurement value
A 5.5.1.3 Error Processing
OUTHOLD NONE|0|<Number>
Setting the behavior of the measurement value output in case of error.
-
NONE: No holding the last measurement value, output of error value
-
0: Infinite holding of the last measurement value
-
Number: Holding the last measurement value on the number of measuring cycles;
then an error value (maximum of 1024) is output.
