Page 80
Appendix |Factory Settings
confocalDT 24x1
A 2
Factory Settings
User group: Professional; password: 000
Measuring program: Distance measure-
ments
Measurement averaging: none
Video averaging: none
Statistics: all measured values
Troubleshooting: Error output
Data selection: Distance 1
Select digital out: Displayed as web dia-
gram
RS422: 115.200K Baud
Ethernet: Static IP
Trigger mode: no trigger
Switching output 1: Error intensity
Language: de
Switching output 2: Error measuring range
Synchronization: No synchronization
Exposure mode: Automatic mode
A 3
Xenon Light Source IFX2471
A 3.1
Warnings
Dangerous high voltage within the Xenon light source. Maintenance of the light source
must be carried out by qualified personnel only.
> Risk of injuries
Do not remove any safety devices.
> Risk of injuries
> Risk of insecure operation
The Xenon light source produces UV radiation.
> Risk of eye injuries
Do not look directly into the light source. Use appropriate eye protection.
Avoid shock and vibration to the Xenon light source.
> Damage or destruction of the Xenon light source
i
Read all safety and operating instructions, before you start using the Xenon light
source.
A 3.2
Functionality
The external light source uses a 75 W Xenon short arc lamp with an output performance
of approx. 250 μW (values may vary depending on the measurement device). The optical
axis has an integrated heat protection filter that is permeable to light.
Wellenlänge [nm]
Relative Intensität
200
400
600
800
1000
Fig. 69 Spectral distribution of the Xenon light source
To ensure optimum performance, the replaceable lamp module is accurately aligned
for coupling into an optical fiber cable with a 50 µm fiber core and a E2000 connector.
This is the reason why the Xenon lamp within the lamp module must be replaced by the
manufacturer.
CAUTION
NOTICE
