Remote Programing
96
MEASure:NWIDth?
(Query)
To the question
MEAS:NWID? <INT{1|2|3|4}>
the instrument returns the negatitive pulse width
of the selected signal.
Response format:
<measured value><NL>
value in format <NR3> expressed in second.
MEASure:PDUTycycle?
(Query)
To the question
MEAS:PDUT? <INT{1|2|3|4}>
the instrument returns the duty cycle of the
selected signal.
Response format:
<measured value><NL>
value in format <NR2> expressed in percent.
MEASure:PERiod?
(Query)
To the question
MEAS:PERiod? <INT{1|2|3|4}>
the instrument returns the period of the
selected signal.
Response format:
<measured value><NL>
value in format <NR3> expressed in second.
MEASure:PTPeak?
(Query)
To the question
MEAS:PTP? <INT{1|2|3|4}>
the instrument returns the peak-to-peak value of
the selected signal.
Response format:
<measured value><NL>
value in format <NR3> expressed in volt.
MEASure:PULse:COUNt?
(Query)
To the question
MEAS:PUL:COUN? <INT{1|2|3|4}>
the instrument returns the pulse count on
screen of the selected signal.
Response format:
<measured value><NL>
value in format <NR2>.
MEASure:PWIDth?
(Query)
To the question
MEAS:PWID? <INT{1|2|3|4}>
the instrument returns the positive pulse width
of the selected signal.
Response format:
<measured value><NL>
value in format <NR3> expressed in second.
MEASure:RISE:OVERshoot
?
(Query)
To the question MEAS:RISE:OVER? <INT{1|2|3|4}> the instrument returns the positive
overshoot of the selected signal.
Response format:
<measured value><NL>
value in format <NR2> expressed in percent.
MEASure:RISE:TIME?
or
MEASure:RTIME?
(Query)
To the question MEAS:RISE:TIME? <INT{1|2|3|4}> the instrument returns the rise time of the
selected signal.
Response format:
<measured value><NL>
value in format <NR3> expressed in second.
MEASure:SUM?
(Query)
To the question MEAS:SUM? <INT{1|2|3|4}> the instrument returns the integral measurement
of the selected signal.
Response format:
<measured value><NL>
value in format <NR3>.
MEASure:VOLT[:DC]?
(Query)
To the question MEAS:VOLT? <INT{1|2|3|4}> the instrument returns the average value of the
selected signal.
Response format:
<measured value><NL>
value in format <NR3> expressed in volt.
Summary of Contents for OX9302-BUS
Page 143: ...X04605B02 Ed 1 03 2018 ...