Remote Programing
94
INITiate:CONTinuous:NAME
(Command)
INIT:CONT:NAME <EDGE|PULse|DELay|EVENt>,<1|0|ON|OFF>
starts or stops the
acquisition in repetitive mode in the indicated trigger mode.
In the CAPTure mode, the capture of faults in (Recorder) files is used.
INITiate[:IMMediate]:NAME
(Command)
INIT:NAME <EDGE|PULse|DELay|EVENt>
runs an acquisition in single mode.
INPut{[1]|2|3|4}:COUPling
(Command/Query)
The
INP{[1]|2|3|4}:COUP <AC|DC|GROund>
command selects the coupling of the selected
channel.
To the question
INP{[1]|2|3|4}:COUP?,
the instrument returns the coupling of the selected
channel.
INPut{[1]|2|3|4}:DMM
:COUPling
(Command/Query)
The
INP{[1]|2|3|4}:DMM:COUP <AC|DC|GROund>
command affects the coupling of the
selected channel.
To the question
INP{[1]|2|3|4}:DMM:COUP?
the instrument returns the current coupling of the
selected channel.
INPUT:DMM
:BANDwidth:RESolution
(Commande/Query)
The INP{[1]|2|3|4}:DMM:BAND:RES <bandwidth>
command limits the channel bandwidth to
a value among : 625 Hz, 5 kHz, 0 (no limit), directly higher or equal to the required value.
To the question
INP{[1]|2|3|4}:DMM:BAND:RES?
the instrument shows the cutoff frequency
of the low-pass filter in use (625 Hz, 5 kHz or 0).
MEASure:AC?
(Query)
To the question
MEAS:AC? <INT{1|2|3|4}>,<CYCle|INTerval>
the instrument returns the
RMS voltage over an integer number of periods (CYCle) or over the measurement interval
(INTerval).
Response format:
<measured value><NL>
value in format <NR3> expressed in volt.
MEASure:AMPLitude?
(Query)
To the question
MEAS: AMPLitude? <INT{1|2|3|4}>
the instrument returns the amplitude of
the selected signal.
MEASure:CURSor:DTIME?
(Query)
To the question
MEAS:CURS:DTIME?,
the instrument returns the time delay between cursors
1 and 2.
Response format:
<measured value><NL>
value in format <NR3> expressed in second.
MEASure:CURSor:DVOLT?
(Query)
To the question
MEAS:CURS:DVOLT?,
the instrument returns the difference between cursors
1 and 2.
Response format:
<measured value><NL>
value in format <NR3> expressed in volt.
Summary of Contents for OX9302-BUS
Page 143: ...X04605B02 Ed 1 03 2018 ...
