Metrix OX9302-BUS, User Manual

Page: 36 / 143

Functional Description
36
4.2.2 Icon/screen of the Multimeter mode
The channel is displayed in the colour defined in the "Oscilloscope" mode. The inactive channels are displayed in white.
Display of the
screen:
4 measurements
4 channels
Channel 1
Several types of measurement are possible on CH1; the other channels are voltmeter channels
only. A display zone is reserved for each of the channels of the instrument. Each of them
displays the following information:

CH1, CH2, CH3, or CH4 as Voltmeter

Ohmmeter and audible safety beep

Continuity

Capacitance meter

Test of component
Volt: no display of the symbol (lower part of the CH zone)

The display of the measurement automatically takes account of the characteristics of
Probix (in particular for temperature measurements by PT100/TK).
Autorange A long press on channel CH validates or invalidates autorange of the channel concerned.
If Autorange is active, the range is displayed in white in a coloured square.
Main
measurement
If the channel is activated, the measurement result is displayed. Otherwise the message "- X -"
occupies the unused space. If "-----" is displayed, measurement is impossible: it is outside the
authorized range, and "OL" is displayed.
Unit
Contains the measurement unit associated with the current measurement range according to
the
Probix used and the type of measurement.
The unit cannot be parameterized in the multimeter mode.