Metrix OX9302-BUS, User Manual

Page: 70 / 143

Technical characteristics
70
Triggering circuit
Characteristics OX 9062
OX 9102
OX 9104
OX 9304
Triggering sources
CH1, CH4
CH1, CH2, CH3, CH4 (OX 9xx4 )
CH1, CH4 ( OX 9102 )
Triggering mode
Automatic
Triggered
Single-shot
Auto Level 50%
BW on triggering
without band
limitation
AC
DC
HF reject
BF reject
10Hz to 100MHz
0Hz to 100MHz
0Hz to 10kHz
10kHz to 100MHz
10Hz to 200MHz
0Hz to 200MHz
0 to 10kHz
10kHz to 200MHz
≥10
Hz
0Hz to BW max
3
0 to 10kHz
≥10
kHz
If bandwidth limitation is activated,
the BW of the triggering is also reduced.
Triggering slope Negative- or positive-going edge
Triggering sensitivity
0.6 div. (0Hz to 50MHz)
1.2 div. (50MHz to 100MHz)
0.6 div. (0Hz to 50MHz)
1.2 div. (50MHz to 200MHz)
0.6 div. (0Hz to 50MHz)
1.2 div. (50MHz to 200 max.)
1.5 div. (200MHz to BW max.)
Noise rejection
≈
±1.5 div.
Triggering level
Range of variation
±10 div.
Type of triggering
on edge - Triggering source : CH1 (CH2) (CH3) CH4
on pulse width
<T1; >T2;
∈
[T1, T2];
∉
[T1, T2]
with T1 and T2
∈
[16ns, 20 s]
triggering
after delay
- from 48ns to 20s
- Source of qualifier: CH1 (CH2) (CH3) CH4
- Triggering source: CH1 (CH2) (CH3) CH4
triggering
after counting
- from 3 to 16,384 events
- Source of qualifier: CH1 (CH2) (CH3) CH4
- Counting source:
CH1 (CH2) (CH3) CH4
- Triggering source: source of the qualifier or of the counting
Holdoff
Adjustable from 64ns to 15 sec.
3
BW max: maximum bandwidth determined by the vertical sensitivity of the channel