Applications
64
6. HOW IS A QUANTITY MEASURED BY MULTIMETER?
6.1 Differentiating the channels
Channel 1 of the
ScopiX
is named CH1. It is used to
measure various physical quantities in addition to the signal
amplitude measurements, using the appropriate
Probix
accessories. The other channels are voltmeter channels
only (or current channels, when used with a
Probix
clamp).
6.2 Type of measurement
Measurements
CH1
CH2
CH3
CH4
Voltage
Current
Resistance
Capacitance
Diode test
Continuity
Power
Temperature by Pt100
By clicking
You can
display the frequency, in the case of an AC amplitude measurement, as a
secondary measurement performed on each channel.
display the Min and Max values of the measurements made, as a secondary
measurement on each channel.
display the relative values of the measurements made, as a secondary
measurement on each channel.
save your configurations, by entering their properties.
Summary of Contents for OX9302-BUS
Page 143: ...X04605B02 Ed 1 03 2018 ...