Metrix OX9302-BUS, User Manual

Page: 12 / 143

Description
12
2. DESCRIPTION OF THE INSTRUMENT
2.1. Front panel
2.2. Rear panel
Hard enclosure covered with
elastomer, tight to drops of water
falling vertically, IP54
Probix terminal
block
Stylus for action
on the touch screen
Colour screen
Display of the applied signals,
accompanied by all adjustment
parameters.
The main command
functions can be modified by the
touch slab using the stylus
provided.
Silicone keypad
30 keys provide direct
access to the main commands.
The screen is divided into
functional zones: display of the
zoom at the same time as the
waveform, automatic
measurements and cursors, FFT
function with time-domain signal.
Each channel and its parameters
are identified by an identical colour
on a black ground for better
visibility.
The colours are optimized to
facilitate identifying the channels.
Series of pictogrammes: they are
intuitive to make them easy to use.
Safety markings
"Use only the probes and leads specified
in the operating manual.
The insulation level varies according to
the probes and accessories used.
Refer to the operating manual and the
safety information on screen.
Disconnect the leads, the probes, and the
power supply before replacing the
battery."
Power supply
Li-Ion battery pack, 10.8V
Four-point connector for connection to a
mains adapter, a battery charger Prop in closed position