Metrix OX9302-BUS, User Manual

Page: 53 / 143

Functional Description
53
4.9 Update of the firmware of embedded programs
Firmware
Periodically, an "update available" message may appear on the home screen, if the
ScopiX is connected to Ethernet or WiFi:
This message means that update files have been downloaded transparently to the
ScopiX : they are available for an update, which is recommended in order to obtain new
functions, bug fixes; etc.

Select OK and the update automatically installs the files in the ScopiX.

The duration of the update varies, but is less than 15 minutes

Follow the directions (see below).

Do not switch off ScopiX during the update.

The files of the internal memory (measurements, screen shots, setups, etc.) are not
destroyed during the update.

For more complete information, go to the support space of our Web site: a manual
update procedure is available.
Update
installation
procedure
1. Connect the ScopiX , preferably to line power.
2. Check "Do you want to install it".
3. ScopiX switches off, then back on, automatically.
4. A screen (yellow-white) of which the colour varies to represent an action in progress,
with an "update running" message, remains on screen for approximately 8 minutes.
5. ScopiX switches itself off and back on.
6. A touch slab calibration procedure screen is displayed: follow the steps by checking
the 4 corners, then the centre.
7. The home screen is displayed again: you can view the new system information (date,
version, etc.)

the update is done.

The operating instructions in .pdf format, or any other updated document, can be
downloaded and placed in the file manager in this way.