Description
16
2.5. Communication interfaces
Communication interfaces
These are grouped in a specialized space
on the right side of the oscilloscope and
protected by a plug that must be lifted off
to reach them.
Type B USB (peripheral) for communication with a PC
RJ45 Ethernet wired peripheral
WiFi (default state is inactive) for communication with a PC or with a network
printer
High-capacity µSD for data storage
On the screen, an icon in three colours
refreshed every 5 minutes,
indicates the presence and occupation rate of the SDcard or of the internal memory.
The general configuration of the communication interfaces appears under the
icon shown opposite; as default, the WiFi link is inactive.
Type of
communication
Hard-wired ETHERNET LAN network (manual/automatic configuration)
Possibility of activating the radio WiFi link to communicate with a PC or, in an
Android environment, with a tablet or a smartphone
Type B USB to connect a PC and exchange files or control the instrument
USB connector
(USB
Type B, 12Mb/s)
RJ45 Ethernet
connector
(10/100
BASE-T)
MicroSD
card
(SD, SDHC,
SDXC)
Probe
calibration
lugs
Summary of Contents for OX9302-BUS
Page 143: ...X04605B02 Ed 1 03 2018 ...