Applications
66
6.4 LOGGER mode
This utility of the Multimeter mode is used to record the values read on the various channels of the
ScopiX
, whatever the
type of measurement.
The records may be long. It is therefore preferable to connect ScopiX to line power so as to avoid
a sudden stoppage of the measurement when the battery is depleted.
When you click
, the screen below is displayed and recording starts:
Each recording file contains 100,000
measurements per channel, at a rate of one
measurement every 0.2 sec for 20,000 sec
(approx. 5h30').
If a recording exceeds 100,000 measurements,
ScopiX
automatically generates a second
measurements file that continues where the
preceding file ended.
If the second measurement file reaches 100,000
measurements, a third file is created, and so on
until you decide to stop the acquisition or the
memory available for the files is full.
Backup of the current configuration. The window below is displayed:
You can enter:
a configuration name
remarks
save it in .cfg format
by clicking the green arrow.
The max. internal memory is 1GB.
To return to the Multimeter mode, click
.
Summary of Contents for OX9302-BUS
Page 143: ...X04605B02 Ed 1 03 2018 ...