Appendix - "Bus analysis" mode
118
12.4.3. Measurements (CAN Low-Speed)
Diagnosis
Use this table to troubleshoot problems on a measurement :
Measurement
Description
Diagnosis
Vdiff Dom
Measurement of the Vdiff dominant
state
Termination problem
Junction connection (oxidation, bad contact,
etc.)
Cable length not compliant with standard
Significant noise (check the cable route, ground
braid not connected, faulty chassis-ground, etc.)
…
Vdiff Rec
Measurement of the Vdiff recessive
state
VCanH Dom
Measurement of the VcanH dominant
state
Chassis-ground disturbance problem
Common mode problem
Cable length not compliant with standard
Significant noise (check the cable route, ground
braid not connected, faulty chassis-ground, etc.)
Junction connection (oxidation, bad contact,
etc.)
…
VCanH Rec
Measurement of the VcanH recessive
state
Time Rise
Rise time between 10% and 90% of
the Vdiff signal amplitude
Unsuitable or damaged cable (the rise and fall
times increase with the cable impedance)
…
Time Fall
Fall time between 90% and 10% of
the Vdiff signal amplitude
Time Data
Measurement made using the bit time
total
Unsuitable or damaged cable
Significant noise (check the cable route, ground
braid not connected, faulty chassis-ground, etc.)
…
Summary of Contents for OX9302-BUS
Page 143: ...X04605B02 Ed 1 03 2018 ...