USER MANUAL, RSS-1000-CVSI
7000-5970
Rev.
A
page
341
of
396
IMPLEMENTATION
OF
TIP
CLEANING
PROFILE
Once a cleaning profile has been created, the next task is to establish where the cleaning zone
is located. The cleaning zone starting point is customizable to accommodate most applications.
Custom cleaning zone locations will be covered in the next section. The Tip Cleaning Profile is a
global setting, or in other words, a setting that will affect all profiles. This profile will remain as the
cleaning profile until a new profile is selected. Therefore, it is imperative that the user be diligent
when programming the cleaning profile and verify that cleaning profile implemented will be compatible
with the solder profile selected. Cleaning will occur at the beginning of every profile as well as the
programmed frequency for solder points and solder lines. In addition, for every transition from a
solder point to a solder line (and vice versa), the system will automatically clean the tip before
performing the other type of soldering action.
1. Navigate to the Toolbar and select the Tip Cleaning Settings Icon
1.1. Note: The icon will illuminate when active
Toolbar
Summary of Contents for RSS-1000-CVSI
Page 21: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 21 of 396 ROBOT BASE CONNECTIONS N ...
Page 52: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 52 of 396 2 Tap the Power Button ...
Page 55: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 55 of 396 2 Tap the Power Button ...
Page 224: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 224 of 396 5 5 Spiral 1 2 3 8 9 4 7 6 5 ...
