USER MANUAL, RSS-1000-CVSI
7000-5970
Rev.
A
page
266
of
396
27.2. A “scaled image” means that any movement commands issued by tapping on the image will
reflect actual distances on the PCBA. For example, if two components were physically 10mm
apart from one another, the displayed image distance may vary, depending on the
magnification (1X, 2X, or 3X). However, in any of the three magnification cases, the operator
would be able to position the end effector over one component, tap on the other component
and the system would travel 10mm.
28. To determine if fine tuning is required, inspect along the edges of the raised surface of the scaling
block displayed in the workspace. The newly scaled image should not have any gap to the left or
above this raised surface (i.e. no bare aluminum should be visible.) Examples have been
provided below.
Gap
Gap
No
Gap
No
Gap
Summary of Contents for RSS-1000-CVSI
Page 21: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 21 of 396 ROBOT BASE CONNECTIONS N ...
Page 52: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 52 of 396 2 Tap the Power Button ...
Page 55: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 55 of 396 2 Tap the Power Button ...
Page 224: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 224 of 396 5 5 Spiral 1 2 3 8 9 4 7 6 5 ...
