USER MANUAL, RSS-1000-CVSI
7000-5970
Rev.
A
page
311
of
396
Component
Layout
Creation
The Smart Interface System allows users to create a library of layouts based on component
dimensions. This is typically used in applications in which the component layout is to be used in
several instances within the PCBA. Components such as integrated circuit chips, transistors, etc. can
all be stored within the system to be inserted in any profile, when needed. One must have the
dimensions of the component readily available to use this feature to its fullest extent. Although
tedious to set-up, once a library of components is saved, future printed circuit boards can be
programmed with the greatest of ease.
1. Tap New Profile
to ensure that the workspace is clear of all programmed points.
2. Navigate to Profile Options and tap the waypoint icon
once to toggle to solder point.
3. Swipe Up or Down to scroll to the desired dot parameter that is to be used.
4. Tap on an arbitrary location within the workspace so that all points recorded can be seen
4.1. Points programmed along any of the limits may be difficult to see.
5. When programming the following points, one must consider the geometry of the component, its
orientation, and critical dimensions. For this example, the following Operational Amplifier will be
used in the orientation shown on the next page.
Summary of Contents for RSS-1000-CVSI
Page 21: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 21 of 396 ROBOT BASE CONNECTIONS N ...
Page 52: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 52 of 396 2 Tap the Power Button ...
Page 55: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 55 of 396 2 Tap the Power Button ...
Page 224: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 224 of 396 5 5 Spiral 1 2 3 8 9 4 7 6 5 ...
