USER MANUAL, RSS-1000-CVSI
7000-5970
Rev.
A
page
229
of
396
Single
Point
Array
1. Tap New Profile
to ensure that the workspace is clear of all programmed points.
2. Navigate to Profile Options and tap the waypoint icon
once to toggle to solder point
3. Swipe Up or Down to scroll through the dot parameters until the desired dot parameter that is to
be used is highlighted by the yellow band.
4. Position the end effector at the location of the top left corner of where the array is to be
programmed.
5. Tap the Generate Array button
5.1. The button will illuminate gold to signify the array function is active
6. Tap the Record button
to designate the first point of the array.
7. Tap the Generate Array button once again to signal the end of all patterns that are to be included
within the array
7.1. The button will return to grey in color
Summary of Contents for RSS-1000-CVSI
Page 21: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 21 of 396 ROBOT BASE CONNECTIONS N ...
Page 52: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 52 of 396 2 Tap the Power Button ...
Page 55: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 55 of 396 2 Tap the Power Button ...
Page 224: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 224 of 396 5 5 Spiral 1 2 3 8 9 4 7 6 5 ...
