USER MANUAL, RSS-1000-CVSI
7000-5970
Rev.
A
page
176
of
396
Transition Speed Section
Transition speed of a point/line is established when the point is first programmed. When a
point is originally programmed, the transition speed at the time of programming be
automatically set for the joint.
The transition speed and type of transition movement displayed strictly pertain to the
highlighted joint
only
. The points can be edited individually, or mass edited using the Apply to
All function.
Programmed transition speed can be changed by tapping on the numerical box and entering
the desired value.
o
1-150 mm/s for Interpolation Move.
o
1-300 mm/s for Space Move.
The type of transition movement (Interpolation or Space move) can be changed by tapping on
the displayed movement to toggle from one to the other. For details on Interpolation and
Space Moves, refer to the
Profile Options
section.
o
The speed will automatically update when toggling from Space Move to Interpolation
Move if set for a value greater than 150 mm/s.
Parameter Details
The Parameter Details section displays the information regarding the highlighted feature
The parameter for any given point can be changed by tapping on the parameter name and
cycling through the parameters within a profile until the desired parameter is highlighted.
Note: A dot cannot be converted into a line and vice versa. If such an action is desired, use
the Snap to function to automatically jog to the desired location and record a new point/line in
its place.
Programmed
Speed
(mm/s)
Programmed
Transition
Move
Programmed
Solder
Parameter
Feature Type
Summary of Contents for RSS-1000-CVSI
Page 21: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 21 of 396 ROBOT BASE CONNECTIONS N ...
Page 52: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 52 of 396 2 Tap the Power Button ...
Page 55: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 55 of 396 2 Tap the Power Button ...
Page 224: ...USER MANUAL RSS 1000 CVSI 7000 5970 Rev A page 224 of 396 5 5 Spiral 1 2 3 8 9 4 7 6 5 ...
