Mazda 3 Sedan 2020 Owner'S Manual Download Page 299

Page: 299 / 628

Inactive

Active (vehicle ahead)

Active (lane line)

If there is a problem with the TJA, a

message is displayed on the

multi-information display. Check the

details of the problem on the center

display and then have your vehicle

inspected by an Authorized Mazda

Dealer.

Refer to If a Warning Light Turns On or

Flashes on page 7-27.

▼

Close Proximity Warning

If your vehicle rapidly closes in on the

vehicle ahead while you are traveling

under headway control, the warning

sound is activated and the brake

warning is indicated on the display.

Keep a safe distance between your

vehicle and a vehicle ahead.

1. “Depress Brake Pedal” message is

displayed

NOTE

In the following cases, the warnings

and brakes may not operate even if

your vehicle starts closing in on the

vehicle ahead.



You are driving your vehicle at the

same speed as the vehicle ahead.



Directly after the TJA operates.



Directly after the accelerator pedal is

released.



Another vehicle cuts into the driving

lane in front of you.

When Driving

i-ACTIVSENSE

4-145

Mazda3_8JM2-EA

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands

Mazda 3 Sedan 2020, Owner'S Manual

Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands