Mazda 3 Sedan 2020 Owner'S Manual Download Page 334

Page: 334 / 628



The 360°View Monitor settings can be changed as follows.

Refer to the Settings section in the Mazda Connect Owner's Manual.



Automatic display of the 360°View Monitor when the ultrasonic sensor detects

an obstruction.



Automatic display of the 360°View Monitor when the ignition is switched ON.



Screen priority level when the system launches.

Top view/Rear view, Top view/Rear wide view

The top view/rear view, top view/rear wide view displays when all of the following

conditions are met.



The ignition is switched ON.



Shift lever/selector lever is in R position.

Display switching

The displayed screen can be changed each time the 360°view monitor switch is

pressed.

1. Top view/Rear view

2. Top view/Rear wide view

NOTE



The top view/rear view and top view/rear wide view automatically display

whether or not the 360°View Monitor switch is turned on or o

ﬀ

when shifting the

shift lever/selector lever to R position.



The top view/rear view and top view/rear wide view displays the previously

displayed screen.



The setting can be changed to display the top view/front view when shifting from

reverse to a forward gear without operating the 360°View Monitor switch to check

the front of the vehicle while parallel parking.

Refer to the Settings section in the Mazda Connect Owner's Manual.

When Driving

i-ACTIVSENSE

4-180

Mazda3_8JM2-EA

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands

Mazda 3 Sedan 2020, Owner'S Manual

Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands