manualshive.com logo in svg

Mazda 3 Sedan 2020, Owner'S Manual, Page: 340 / 628

Share
Download
Mazda 3 Sedan 2020 Owner'S Manual Download Page 340

Viewing the screen

 

Display/Icon

Content

(1) Extended vehicle width lines and

distance guide lines (blue & red)

Indicates the approximate width of the vehicle and the
distance (from front end of bumper) in front of the vehi-
cle.

The red lines indicate the points up to about 0.5 m (19
in) from the front end of the bumper.

NOTE

The front wide view screen displays the image in front of the vehicle at a wide angle

and corrects the image to help detect approaching obstructions from the side.

Therefore, it di

ff

ers from the actual view.

When Driving

i-ACTIVSENSE

4-186

Mazda3_8JM2-EA

-

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Reviews:

No comments