Mazda 3 Sedan 2020, Owner'S Manual

Page: 307 / 628

NOTE

If the set speed is not indicated on the display, the system does not operate even if
the RES switch is pressed.

After the operation, the steering assist operation may not operate for a period of 5
seconds at the most until the lane lines are detected or a vehicle ahead is
recognized.
Turning o ff
When the TJA switch is pressed while the TJA is operating, the TJA turns o ff .
▼
Shift-up/Shift-down Request
Display (Manual Transmission)
The shift-up or shift-down request
display might be displayed while the
TJA is operating. When this occurs, shift
gears because the gear position is not
appropriate.
Request Indication on display
Shift up Shift Up to a Higher Gear
Shift down Shift Down to a Lower Gear
NOTE

If the gears are not shifted up even
though the shift-up request
indication is displayed, load will be
applied to the engine and the TJA
might be automatically canceled or
engine damage could occur.

If the gears are not shifted down
even though the shift-down request
indication is displayed, the TJA might
be automatically canceled or engine
stalling could occur.
▼
Stop Hold Control (Automatic
Transmission)
While in headway control using the
TJA, your vehicle will stop when a
vehicle ahead stops. When the vehicle
is stopped and the stop hold control
operates, the TJA indicator light turns
on.
NOTE

Even if the TJA is temporarily
canceled during stop hold control,
the vehicle is held in its stopped
position.

The parking brake is automatically
applied and the vehicle is held in its
stopped position when 10 minutes
or longer have passed since the stop
hold control operated. When this
occurs, the TJA is temporarily
canceled.

The brake lights turn on during stop
hold control.
When Driving
i-ACTIVSENSE
4-153
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35