Mazda 3 Sedan 2020 Owner'S Manual Download Page 242

Page: 242 / 628

System stand-by status

If none of the systems are activated or

if there is a problem with the system,

the i-ACTIVSENSE status symbol

(warning/risk avoidance support

system) (white) is displayed.

NOTE

For example, even when the Blind Spot

Monitoring (BSM) is operating

normally, if the Lane Departure

Warning System (LDWS) has a

problem, the i-ACTIVSENSE status

symbol (warning/risk avoidance

support system) (white) is displayed.

i-ACTIVSENSE status symbol

(warning/risk avoidance support

system) (green)

System activated status

If any one of the systems is activated,

the i-ACTIVSENSE status symbol

(warning/risk avoidance support

system) (green) is displayed.

NOTE

Even if the i-ACTIVSENSE status symbol

(warning/risk avoidance support

system) (green) is displayed, systems

which do not meet the operation

conditions will not operate.

i-ACTIVSENSE status symbol

(warning/risk avoidance support

system) (amber)

System warning status

If any system warning is activated, the

i-ACTIVSENSE status symbol (warning/

risk avoidance support system)

(amber) is displayed.

i-ACTIVSENSE OFF symbol (warning/

risk avoidance support system)

System OFF status

If all the systems are canceled using the

personalization features or the

i-ACTIVSENSE OFF switch, the

i-ACTIVSENSE OFF symbol (Warning/

risk avoidance support system) is

displayed.

When Driving

i-ACTIVSENSE

4-88

Mazda3_8JM2-EA

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands

Mazda 3 Sedan 2020, Owner'S Manual

Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands