Mazda 3 Sedan 2020, Owner'S Manual

Page: 227 / 628

▼
To Turn On AUTOHOLD System
Press the AUTOHOLD switch and
when the AUTOHOLD standby
indicator light turns on, the
AUTOHOLD function turns on.
1. AUTOHOLD standby indicator light
NOTE
When all of the following conditions
are met, the AUTOHOLD standby
indicator light turns on when the
AUTOHOLD switch is pressed and the
AUTOHOLD function turns on.

The ignition is switched ON (engine
is running).

The driver's seat belt is fastened.

The driver's door is closed.

There is no problem with the
AUTOHOLD function.
To operate AUTOHOLD and hold the
brakes
1. Depress the brake pedal and bring
the vehicle to a complete stop.
2. The AUTOHOLD active indicator
light in the instrument cluster turns
on and the brakes are held.
3. The vehicle is held in its stopped
position even with the brake pedal
released.
NOTE
When all of the following conditions
are met, the AUTOHOLD operates and
the brakes are held.

The ignition is switched ON (engine
is running).

The vehicle is stopped.

The brake pedal is being depressed.

The AUTOHOLD active indicator
light turns on.

The accelerator pedal is not
depressed.

The driver's seat belt is fastened.

The driver's door is closed.

There is no problem with the
AUTOHOLD function.

The parking brake is released.

There is no problem with the Electric
Parking Brake (EPB) function.

(Automatic transmission vehicle)
The selector lever is in a position
other than R position or the vehicle
tilts forward with the selector lever in
the R position.
To release AUTOHOLD and start
driving the vehicle
If you try to resume driving the vehicle,
the brakes will be released
automatically and the AUTOHOLD
active indicator light turns o ff .
When Driving
Brake
4-73
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35