Mazda 3 Sedan 2020, Owner'S Manual

Page: 206 / 628

Turn and Lane-Change
Signals
▼
Turn and Lane-Change Signals
The ignition must be switched ON to
use the turn and lane-change signals.
▼
Turn Signals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel
after the turn is completed.
If the indicator light continues to fl ash
after a turn, manually return the lever
to its original position.
1. Right turn
2. Right lane change
3. OFF
4. Left lane change
5. Left turn
The turn signal indicators in the
instrument cluster fl ash according to
the operation of the turn signal lever to
show which signal is working.
NOTE

There may be a problem with the
turn signal lights if they do not fl ash
but remain turned on, or they fl ash
abnormally. Have your vehicle
inspected by an Authorized Mazda
Dealer.

A personalized function is available
to change the turn indicator sound
volume.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
▼
Lane-Change Signals
Move the lever halfway toward the
direction of the lane change
―
until the
indicator fl ashes
―
and hold it there. It
will return to the o ff position when
released.
▼
Three-Flash Turn Signal
After releasing the turn signal lever
from the halfway point, the turn signal
indicator fl ashes 3 times. The
operation can be canceled by moving
the lever in the direction opposite to
which it was operated.
NOTE
The three- fl ash turn signal function can
be switched to on/o ff using the
personalization function.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
When Driving
Switches and Controls
4-52
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35