Mazda 3 Sedan 2020, Owner'S Manual, Page: 37 / 628

▼
Driving Position Memory (Power
Seat) *
The desired driving position can be
called up after programming the
position.
The following driving positions can be
programmed.

Driver’s seat position (seat slide,
height adjustment, front edge of seat
bottom, seat recline)
Refer to Adjusting the Driver's Seat
on page 2-5.

Active driving display (display
position, brightness level, display
information)
Refer to Active Driving Display on
page 4-30.

Outside mirror angle
Refer to Outside Mirrors on page
3-30.
A driving position can be programmed
to the following parts.

Position memory button

Transmitter used for vehicle
NOTE

Lumbar support adjustment cannot
be programmed.
Programming
1. Make sure the parking brake is on.
2. (Automatic transmission)
Make sure the selector lever is in
the P position.
3. Switch the ignition ON.
4. Adjust the following parts to the
desired conditions.

Driver's seat

Active driving display

Outside mirrors
5. Press the SET button continuously
until a sound is activated.
1. 1 button
2. 2 button
3. SET button
6. Do the following operation within 5
seconds after the sound is activated
to program the driving position.

Programming to a position
memory button
Press the button you want to
program, either 1 or 2 button.

Programming to the transmitter
Press the unlock button on the
transmitter.
A sound is activated when the
operation is completed correctly.
NOTE

If you do not perform the operation
correctly, a sound indicating that the
programming has failed is activated.

If the angle of the outer mirrors only
changes a little, the angle of the
outer mirrors may not have been
programmed correctly.

If the angle of the outer mirrors is
adjusted close to the limits of its
range of motion, the driving position
can be successfully programmed, but
it may fail when calling up the
programmed driving position.
Essential Safety Equipment
Seats
*Some models.
2-11
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35