Mazda 3 Sedan 2020 Owner'S Manual Download Page 361

Page: 361 / 628



A pedestrian is in a dark location

such as during the night, or blends

into the background by wearing

clothes matching the background

color.

Front Radar Sensor

▼

Front Radar Sensor

Your vehicle is equipped with a front

radar sensor.

The following systems also use the

front radar sensor.



Distance & Speed Alert (DSA)



Mazda Radar Cruise Control

(MRCC)



Mazda Radar Cruise Control with

Stop & Go function (MRCC with

Stop & Go function)



Tra

ﬃ

c Jam Assist (TJA)



Smart Brake Support (SBS)

The front radar sensor functions by

detecting the radio waves re

ected o

ﬀ

a vehicle ahead or an obstruction sent

from the radar sensor.

The front radar sensor is mounted

behind the front emblem.

1. Front radar sensor

If “Safety and Driver Support Systems

Temporarily Disabled. Front Radar

Obscured. Drive Safely” is displayed on

the multi-information display of the

instrument cluster, clean the area

around the front radar sensor.

CAUTION

Heed the following precautions to

assure correct operation of each

system.

When Driving

i-ACTIVSENSE

*Some models.

4-207

Mazda3_8JM2-EA

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands

Mazda 3 Sedan 2020, Owner'S Manual

Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands