Mazda 3 Sedan 2020, Owner'S Manual

Page: 292 / 628

Canceling the system
When the following operations are performed, the MRCC with Stop & Go function
system is canceled, and the MRCC with Stop & Go function set indication (green)
switches to the MRCC with Stop & Go function standby indication (white) at the
same time.

The CANCEL switch is pressed.

The brake pedal is depressed.

The selector lever is in the P (Park), N (Neutral), or R (Reverse) position.
Under the following conditions, the MRCC with Stop & Go function cancel
indication is displayed in the multi-information display and a single beep sound is
heard.

The DSC has operated.

The Smart Brake Support (SBS) has operated.

When traveling on a downslope for a long period of time.

There is a problem with the system.

The parking brake is automatically applied during stop hold control.

The front radar sensor cannot detect target objects (during rain, fog, snow or other
inclement weather conditions, or when the radiator grille is dirty).

The parking brake is applied.

Any of the doors is opened.

The driver's seat belt is unfastened.

The operation frequency of the braking by the MRCC with Stop & Go function
control is high.
Resuming control
If the MRCC with Stop & Go function system is canceled, you can resume control at
the previously set speed by pressing the RES switch and after all of the operation
conditions have been met.
NOTE
If the set speed is not indicated in the display, the control does not resume even if
the RES switch is pressed.
Turning o ff the system
When the MRCC switch is pressed while the MRCC is operating, the MRCC turns
o ff .
When Driving
i-ACTIVSENSE
4-138
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35