Mazda 3 Sedan 2020, Owner'S Manual

Page: 208 / 628

Switch Posi-
tion
Wiper operation
MIST
Operation while pulling up lev-
er
OFF Stop
INT Intermittent
LO Low speed
HI High speed
Variable-speed intermittent wipers
Set the lever to the intermittent
position and choose the interval timing
by rotating the switch.
Rotate the switch upward (FAST
direction) to shorten the interval time
of the wiper operation, and rotate the
switch downward (SLOW direction) to
lengthen it.
1. Switch
With auto-wiper control
1. Indicator light
Switch Posi-
tion
Wiper operation
MIST
Operation while pulling up lev-
er
OFF Stop
AUTO
*1 Auto control
LO Low speed
HI High speed
*
1 When the wiper lever is switched to the
AUTO position, the indicator light turns on.
Auto-wiper control *
When the wiper lever is in the AUTO
position, the rain sensor senses the
amount of rainfall on the windshield
and turns the wipers on or o ff
automatically (o ff
―
intermittent
―
low
speed
―
high speed).
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the center position (normal),
rotate the switch upward (+ direction)
for higher sensitivity (faster response)
or rotate it downward (- direction) for
less sensitivity (slower response).
1. Switch
2. Higher sensitivity
3. Center position
4. Less sensitivity
When Driving
Switches and Controls
4-54
*Some models.
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35