Mazda 3 Sedan 2020, Owner'S Manual

Page: 39 / 628

NOTE

When adjustment of the driving
position is not necessary, a sound is
not activated.

The driving position adjustment is
canceled in the following cases:

The seat adjustment switch on the
driver's seat is operated.

The angle of the outer mirrors is
adjusted.

The SET button is pressed.

Programming button 1 or 2 is
pressed.

The lock button or unlock button
on the transmitter is pressed.

The vehicle starts moving.

The active driving display is
adjusted.

(Manual transmission)
The parking brake is released.

(Automatic transmission)
The selector lever is shifted to a
position other than P.
Erasing programmed driving positions
Erasing the driving positions
programmed to the key
1. Switch the ignition OFF.
2. Press the SET button continuously
until a sound is activated.
3. Press the lock button on the
transmitter within 5 seconds after
the sound is activated.
NOTE
If you do not perform the operation
correctly, a sound indicating that the
programming has failed is activated.
▼
Adjusting the Front Passenger's
Seat
1. Seat Slide
To move a seat forward or
backward, raise the lever and slide
the seat to the desired position and
release the lever.
Make sure the lever returns to its
original position and the seat is
locked in place by attempting to
push it forward and backward.
2. Seat Recline
To change the seatback angle, lean
forward slightly while raising the
lever. Then lean back to the desired
position and release the lever.
Make sure the lever returns to its
original position and the seatback is
locked in place by attempting to
push it forward and backward.
Essential Safety Equipment
Seats
2-13
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35