Mazda 3 Sedan 2020 Owner'S Manual Download Page 419

Page: 419 / 628

No.

Menu

Explanation

(6) Settings

You can change the settings for the Mazda Connect screen, sound set-
tings, and the vehicle functions.

In-Vehicle Displays:

Con

gures settings and content for all in-vehicle displays.

Sound Settings:

Con

gures the in-vehicle listening experience.

Safety Settings:

Con

gures safety and driver assistance features.

Vehicle Settings:

Con

gures vehicle convenience features.

Connectivity Settings:

Con

gures Bluetooth and other device connectivity settings.

System Settings:

Con

gures language, time, and other general settings.

(7) Apple CarPlay

You can use Apple CarPlay™ by connecting an iPhone

compatible with

Apple CarPlay™ to the USB slot.

(8) Android Auto

You can use Android Auto™ by connecting an Android™ Smartphone
compatible with Android Auto™ to the USB port.

WARNING

Always adjust Mazda Connect while the vehicle is stopped:

Do not adjust Mazda Connect with the Commander switch while driving the

vehicle. Adjusting Mazda Connect with the Commander switch while driving the

vehicle is dangerous as it could distract your attention from the vehicle operation

which could lead to a serious accident.

Even if the audio remote control switches are equipped on the steering wheel, learn

to use the switches without looking down at them so that you can keep your

maximum attention on the road while driving the vehicle.

Do not allow the connection plug cord to get tangled with the shift lever (manual

transmission)/selector lever (automatic transmission):

Allowing the plug cord to become tangled with the shift lever (manual

transmission)/selector lever (automatic transmission) is dangerous as it could

interfere with driving, resulting in an accident.

Interior Features

Mazda Connect

5-17

Mazda3_8JM2-EA

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands

Mazda 3 Sedan 2020, Owner'S Manual

Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands