Mazda 3 Sedan 2020, Owner'S Manual

Page: 489 / 628


Rear side-marker lights

Brake lights

Taillights

Reverse lights

License plate lights
The LED bulb cannot be replaced as a
single unit because it is an integrated
unit.
The LED bulb has to be replaced with
the unit. We recommend an
Authorized Mazda Dealer when the
replacement is necessary.
Bulb type
Parking lights/Front side-marker
lights (Type B)
1. Make sure the ignition is switched
o ff , and the headlight switch is o ff .
2. If you are changing the left bulb,
start the engine, turn the steering
wheel all the way to the right, and
turn o ff engine. If you are changing
the right bulb, turn the steering
wheel to the left.
3. Pull the center of each plastic
retainer and remove the retainers.
1. Removal
2. Installation
4. Pull the center of each plastic
retainer and remove the retainers.
1. Removal
2. Installation
5. Turn the screw counterclockwise
and remove it, and then partially
peel back the mudguard.
6. Turn the socket and bulb assembly
counterclockwise and remove it.
7. Disconnect the bulb from the
socket.
8. Install the new bulb in the reverse
order of the removal procedure.
Maintenance and Care
Owner Maintenance
6-39
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35