manualshive.com logo in svg

Mazda 3 Sedan 2020, Owner'S Manual, Page: 171 / 628

Share
Download
Mazda 3 Sedan 2020 Owner'S Manual Download Page 171

▼

Engine Coolant Temperature

Gauge

Displays the engine coolant

temperature. The blue range of the

gauge indicates that the engine coolant

temperature is low, and the red range

of the gauge indicates that the engine

coolant temperature is high and

overheating.

 

CAUTION

When the engine coolant temperature

gauge needle is in the red range, the

engine coolant temperature is

extremely high. Drive slowly to reduce

engine load. If the engine coolant

temperature gauge needle is in the red

range, there is the possibility of

overheating. Park the vehicle in a safe

place immediately and take

appropriate measures.

Refer to Overheating on page 7-21.

NOTE

If the engine or engine coolant

temperature is high or low, the

engine output may be restricted to

protect the engine.

▼

Fuel Gauge

The fuel gauge shows approximately

how much fuel is remaining in the tank

when the ignition is switched ON. We

recommend keeping the tank over 1/4

full.

 

1. Full

2. 1/4 Full

3. Empty

 

When Driving

Instrument Cluster and Display

4-17

Mazda3_8JM2-EA

-

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Reviews:

No comments