Mazda 3 Sedan 2020 Owner'S Manual Download Page 366

Page: 366 / 628



Vehicles are shipped with the

direction of the rear side radar

sensor adjusted for each vehicle to a

loaded vehicle condition so that the

rear side radar sensor detect

approaching vehicles correctly. If the

direction of the rear side radar

sensor has deviated for some reason,

have the vehicle inspected at an

Authorized Mazda Dealer.



For repairs or replacement of the rear

side radar sensor, or bumper repairs,

paintwork, and replacement near the

radar sensors, consult an Authorized

Mazda Dealer.



The radar sensors are regulated by

the relevant radio wave laws of the

country in which the vehicle is

driven. If the vehicle is driven

abroad, authorization from the

country in which the vehicle is driven

may be required.

Rear/Rear corner/Rear

Side Ultrasonic Sensor

▼

Rear/Rear corner/Rear Side

Ultrasonic Sensor

The ultrasonic sensors function by

emitting ultrasonic waves which are

ected o

ﬀ

obstructions at the rear

and the returning ultrasonic waves are

picked up by the ultrasonic sensors.

4–Door

1. Rear ultrasonic sensor

2. Rear corner ultrasonic sensor

3. Rear side ultrasonic sensor

5–Door

1. Rear ultrasonic sensor

2. Rear corner ultrasonic sensor

3. Rear side ultrasonic sensor

The ultrasonic sensors are mounted in

the rear bumper.

When Driving

i-ACTIVSENSE

4-212

*Some models.

Mazda3_8JM2-EA

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands

Mazda 3 Sedan 2020, Owner'S Manual

Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands