Mazda 3 Sedan 2020, Owner'S Manual

Page: 202 / 628

*
7 When the light switch is switched to a di ff erent position from the AUTO position while the vehicle is
stopped, the daytime running lights turn o ff . When starting to drive the vehicle, the daytime running
lights turn on again.
*
8 If one of the following operations is done from the position while the vehicle is stopped, the
daytime running lights turn o ff .

Switch the light switch to the OFF position.

Switch the light switch to the AUTO position, and then to the position again.

Switch the light switch to the position.
When starting to drive the vehicle, the daytime running lights turn on again.
*
9 When the ignition is switched from ON to ACC or OFF, the headlights remain on if the auto headlight
o ff function has been canceled. If the auto headlight o ff function is enabled, the lights turn on for the
set period using the auto headlight o ff function, and then they turn o ff .
Auto-light control
When the headlight switch is in the AUTO position and the ignition is switched ON,
the light sensor senses the surrounding lightness or darkness and automatically turns
the headlights and other exterior lights on or o ff .
CAUTION
 Do not shade the light sensor by adhering a sticker or a label on the windshield.
Otherwise the light sensor will not operate correctly.

The light sensor also works as a rain sensor for the auto-wiper control. Keep hands
and scrapers clear of the windshield when the wiper lever is in the AUTO position
and the ignition is switched ON as fi ngers could be pinched or the wipers and
wiper blades could be damaged when the wipers activate automatically. If you are
going to clean the windshield, be sure the wipers are turned o ff completely when
it is particularly tempting to leave the engine running. This is particularly important
when clearing ice and snow.
When Driving
Switches and Controls
4-48
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35