Mazda 3 Sedan 2020, Owner'S Manual

Page: 218 / 628

1. Press the two outer HomeLink
buttons continuously at the same
time until the indicator light
fl
ashes.
1. HomeLink button 3
2. HomeLink button 1
2. Stop pressing the HomeLink
buttons.
▼
Garage Door Two-Way
Communication
The garage door two-way
communication is a function that
communicates with the garage door
opener and indicates whether the
garages door is open or closed using
the indicator lights in the rear view
mirror. It can indicate the status of the
garage door within a range up-to 250
m (820 ft).
NOTE
The communication range may shorten
depending on obstructions.
Programming two-way
communication
Within fi ve seconds after programming
a new HomeLink button, both of the
garage door status indicator lights will
fl
ash rapidly in green indicating that
the garage door two-way
communication has been established.
If the garage door status indicator
lights
fl
ash, the two-way
communication programming is
complete.
If the garage door status indicator
lights do not fl ash, the two-way
communication programming is not
completed. For additional HomeLink
information and programming videos,
refer to the following Websites:

www.HomeLink.com

www.youtube.com/
HomeLinkGentex
Operating the garage door two-way
communication
By pressing HomeLink buttons 1 and 2
at the same time for two seconds, the
status of the garage door is indicated
for about 3 seconds as follows:
1. HomeLink button 2
2. HomeLink button 1
Garage door
status
Indicator light
Closing
Amber
fl
ashes
Opening
Amber fl ashes
Closed
Green turns on
Opened
Green turns on
NOTE
The programming will not be erased
even if the battery is disconnected.
When Driving
Switches and Controls
4-64
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35