Mazda 3 Sedan 2020 Owner'S Manual Download Page 357

Page: 357 / 628

Forward Sensing Camera

(FSC)

▼

Forward Sensing Camera (FSC)

Your vehicle is equipped with a

Forward Sensing Camera (FSC). The

Forward Sensing Camera (FSC) is

positioned near the rearview mirror

and used by the following systems.



High Beam Control System (HBC)



Lane Departure Warning System

(LDWS)



Tra

ﬃ

c Sign Recognition System (TSR)



Distance & Speed Alert (DSA)



Driver Attention Alert (DAA)



Mazda Radar Cruise Control

(MRCC)



Mazda Radar Cruise Control with

Stop & Go function (MRCC with

Stop & Go function)



Lane-keep Assist System (LAS)



Tra

ﬃ

c Jam Assist (TJA)



Smart Brake Support (SBS)

1. Forward Sensing Camera (FSC)

The Forward Sensing Camera (FSC)

determines the conditions ahead of

the vehicle while traveling at night and

detects tra

ﬃ

c lanes. The distance in

which the Forward Sensing Camera

(FSC) can detect objects varies

depending on the surrounding

conditions.

WARNING

Do not modify the suspension:

If the vehicle height or inclination is

changed, the system will not be able to

correctly detect vehicles ahead. This

will result in the system not operating

normally or mistakenly operating,

which could cause a serious accident.

CAUTION



Do not apply accessories, stickers or

lm to the windshield near the

Forward Sensing Camera (FSC).

If the area in front of the Forward

Sensing Camera (FSC) lens is

obstructed, it will cause the system

to not operate correctly.

Consequently, each system may not

operate normally which could lead

to an unexpected accident.



Do not disassemble or modify the

Forward Sensing Camera (FSC).

Disassembly or modi

cation of the

Forward Sensing Camera (FSC) will

cause a malfunction or mistaken

operation. Consequently, each

system may not operate normally

which could lead to an unexpected

accident.



Heed the following cautions to

assure the correct operation of the

Forward Sensing Camera (FSC).



Be careful not to scratch the

Forward Sensing Camera (FSC)

lens or allow it to get dirty.

When Driving

i-ACTIVSENSE

*Some models.

4-203

Mazda3_8JM2-EA

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands

Mazda 3 Sedan 2020, Owner'S Manual

Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands