Mazda 3 Sedan 2020, Owner'S Manual

Page: 291 / 628

Distance-between-vehicles
guideline
(at 80 km/h (50 mph) vehicle
speed)
Indication on multi-information
display
Indication on active driving dis-
play *1
Extremely short (about 25 m (82
ft))
*
1 Displays a pop-up image in the active driving display only when the driver operates the switch.
NOTE

The distance-between-vehicles di ff ers depending on the vehicle speed, and the
slower the vehicle speed, the shorter the distance.

When the ignition is switched to ACC or OFF and then the engine is started again,
the system automatically sets the distance-between-vehicles to the previous
setting.
Changing the Set Vehicle Speed
(To accelerate/decelerate using the RES switch)
When the RES switch is pressed up (SET+), the vehicle accelerates and when the RES
switch is pressed down (SET - ), it decelerates.

Press and release immediately: 1 km/h (1 mph)

Press and hold: 10 km/h (5 mph)
(To increase speed using accelerator pedal)
Depress the accelerator pedal and press the RES switch up (SET+) or down (SET - ) at
the desired speed. If the switch is not operated, the system returns to the set speed
after you release your foot from the accelerator pedal.
NOTE

The warnings and brake control do not operate while the accelerator pedal is
depressed.

The setting speed can be changed by operating the RES switch up (SET+) or down
(SET - ) during stop hold control.
When Driving
i-ACTIVSENSE
4-137
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35