Mazda 3 Sedan 2020 Owner'S Manual Download Page 547

Page: 547 / 628

Display

*1*2

Content

Action to be taken

Windshield Wiper Range
of Motion Reduced. Re-
move Obstruction(s)

This message is indicated when there
is snow or dirt accumulation on the
windshield and the wiper operation
range is narrowed.

Remove foreign matter from the
windshield.

Vehicle Not Switched
O

ﬀ

This message is indicated when the
driver’s door is opened without
switching the ignition OFF.

Switch the ignition OFF before leaving
the vehicle.

Gear Selector Lever Not
in Park

Displays when the push button start
is pressed while the selector lever is
in a position other than P, and the ig-
nition is switched to ACC.

Shift the selector lever to the P posi-
tion and then switch the ignition OFF.

Excessive Transmission
Temperature. Drive
Slowly

This message is indicated when the
internal temperature of the automatic
transmission is high.

Drive slowly to reduce load on the
automatic transmission.

Excessive Transmission
Temp. Stop Vehicle in a
Safe Location

This message is indicated when the
automatic transmission

uid temper-

ature is abnormally high.

Park the vehicle in a safe place imme-
diately and contact an Authorized
Mazda Dealer.

Low Battery Risk. Start
Vehicle to Charge 12V
Battery

Displays if the battery charge is de-
pleted.

To charge the battery, start the engine
and keep running the engine for 5
minutes or longer.

1 A pop-up is displayed when a warning occurs.

2 One screen displays four rows. If the entire message cannot be displayed on the screen, it switches to

another screen.

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

7-41

Mazda3_8JM2-EA

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands

Mazda 3 Sedan 2020, Owner'S Manual

Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands