Mazda 3 Sedan 2020, Owner'S Manual

Page: 505 / 628

▼
Upholstery Maintenance
1. Clean the soiled area by lightly
dabbing it with a soft cloth soaked
in a mild detergent (approx. 5%)
diluted with water.
2. Wipe o ff the remaining detergent
using a cloth soaked in clean water
and wrung out well.
▼
Leather Upholstery Maintenance *
1. Remove dust and sand using a
vacuum cleaner.
2. Wipe o ff the soiled area with a soft
cloth and a suitable, special cleaner
or a soft cloth soaked in a mild
detergent (about 5%) diluted with
water.
3. Wipe o ff the remaining detergent
using a cloth soaked in clean water
and wrung out well.
4. Remove moisture with a dry, soft
cloth and allow the leather to
further dry in a well-ventilated,
shaded area. If the leather gets wet
such as from rain, remove the
moisture and dry it as soon as
possible.
NOTE

Because genuine leather is a natural
material, its surface is not uniform
and it may have natural scars,
scratches, and wrinkles.

To maintain the quality for as long as
possible, periodical maintenance,
about twice a year, is recommended.

If the leather upholstery comes into
contact with any of the following,
clean it immediately.
Leaving it uncleaned could cause
premature wear, mold, or stains.

Sand or dirt

Grease or oil, such as hand cream

Alcohol, such as in cosmetic or
hair dressing items

If the leather upholstery gets wet,
promptly remove moisture with a dry
cloth. Remaining moisture on the
surface may cause deterioration such
as hardening and shrinkage.

Exposure to direct sunlight for long
periods may cause deterioration and
shrinkage. When parking the car
under direct sunlight for long
periods, shade the interior using
sunshades.

Do not leave vinyl products on the
leather upholstery for long periods.
They may a ff ect the leather quality
and coloring. If the cabin
temperature becomes hot, the vinyl
may deteriorate and adhere to the
genuine leather.
▼
Plastic Part Maintenance
CAUTION
Do not use polishing agents.
Depending on the product ingredients,
they could cause discoloration, stains,
cracks or peeling of the coating.
▼
Instrument Panel Top (Soft pad)
Maintenance
Extremely soft material is used for the
soft pad surface. If the soft pad surface
is rubbed harshly with a dry cloth, it
could result in the surface being
damaged and leaving white scratch
marks.
1. Wipe the soiled area with a soft
cloth soaked in a mild detergent
(approx. 5%) diluted with water.
2. Wipe o ff the remaining detergent
using a cloth soaked in clean water
and wrung out well.
Maintenance and Care
Appearance Care
*Some models.
6-55
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35