Mazda 3 Sedan 2020 Owner'S Manual Download Page 56

Page: 56 / 628

Seat Belt Extender

▼

Seat Belt Extender

If your seat belt is not long enough,

even when fully extended, a seat belt

extender may be available to you at no

charge from your Authorized Mazda

Dealer.

This extender will be only for you and

for the particular vehicle and seat. Even

if it plugs into other seat belts, it may

not hold in the critical moment of a

crash.

When ordering an extender, only order

one that provides the necessary

additional length to fasten the seat belt

properly. Please contact your

Authorized Mazda Dealer for more

information.

WARNING

Do not use a seat belt extender unless

it is necessary:

Using a seat belt extender when not

necessary is dangerous. The seat belt

will be too long and not

t properly. In

an accident, the seat belt will not

provide adequate protection and you

could be seriously injured. Only use

the extender when it is required to

fasten the seat belt properly.

Do not use an improper extender:

Using a seat belt extender that is for

another person or a di

ﬀ

erent vehicle or

seat is dangerous. The seat belt will not

provide adequate protection and the

user could be seriously injured in an

accident. Only use the extender

provided for you and for the particular

vehicle and seat. NEVER use the

extender in a di

ﬀ

erent vehicle or seat.

If you sell your Mazda, do not leave

your seat belt extender in the vehicle.

It could be used accidentally by the

new owner of the vehicle. After

removing the seat belt extender,

discard it. Never use the seat belt

extender in any other vehicle you may

own in the future.

Do not use an extender that is too

long:

Using an extender that is too long is

dangerous. The seat belt will not

properly. In an accident, the seat belt

will not provide adequate protection

and you could be seriously injured. Do

not use the extender or choose one

shorter in length if the distance

between the extender's buckle and the

center of the user's body is less than

15 cm (6 in).

Essential Safety Equipment

Seat Belt Systems

2-30

Mazda3_8JM2-EA

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands

Mazda 3 Sedan 2020, Owner'S Manual

Search results

Summary of Contents for 3 Sedan 2020

Reviews:

Related manuals for 3 Sedan 2020

Brands by name

Popular brands