Mazda 3 Sedan 2020, Owner'S Manual

Page: 325 / 628


The method for parking/stopping
the vehicle using the 360°View
Monitor di ff ers depending on the
road circumstances/conditions and
the vehicle conditions. When and
how much you turn the steering
wheel will di ff er depending on the
situation, , therefore always check
the vehicle surroundings directly with
your eyes while using the system.
Also, before using the system, always
make sure that the vehicle can be
parked/stopped in the parking/
stopping space.
NOTE

If there are water droplets, snow, or
mud on the camera lens, wipe it o ff
using a soft cloth. If the camera lens
is especially dirty, wash it o
ff
with
mild detergent.

If the camera lens is touched or there
is any dirt on it, it could a ff ect the
screen image. Wipe the lens using a
soft cloth.

If the area where the camera is
installed, such as the front/rear
bumper or door mirrors, has been
damaged in a vehicle accident, the
camera (position, installation angle)
may have shifted. Always consult an
Authorized Mazda Dealer to have
the vehicle inspected.

If the camera is subjected to
excessive changes in temperature
such as by pouring hot water on the
camera during cold weather, the
360°View Monitor may not operate
normally.

If the vehicle is driven during cold
temperatures and the camera
temperature decreases, the top view
and the side view may become
unclear. However, this does not
indicate a problem. If the vehicle is
stopped for a while and the camera
temperature increases, the top view
and the side view will return to the
normal condition.

If the battery voltage is low, the
screen might be temporarily di ffi cult
to view, however, this does not
indicate a problem.

The 360°View Monitor has
limitations. Objects under the
bumper or near both ends of the
bumper cannot be displayed.

Obstructions above the upper image
range of the camera are not
displayed.

Under the following conditions, the
screen might be di ffi cult to view,
however this does not indicate a
problem.

The temperature near the lens is
high/low.

Rainy conditions, water droplets
on the camera, or high humidity.

Mud or foreign matter near the
camera.

Extremely bright light such as
sunlight or headlights hitting the
camera lens directly.

The surroundings are illuminated
by vehicle lights, fl uorescent lights,
or LED lights (display may fl icker).

Extremely small dark or white dots
appear on the screen (dots may
fl icker).

Because the 360°View Monitor
camera uses a special lens, the
distance displayed on the screen
di ff ers from the actual distance.
When Driving
i-ACTIVSENSE
4-171
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35