background image

NOTE

The detection ability of the front side

radar sensor has limitations. In the

following cases, the detection ability

may lower and the system may not

operate normally.

The front bumper near the front

side radar sensor has become

deformed.

Snow, ice or mud adheres to the

front side radar sensor on the front

bumper.

Under bad weather conditions

such as rain, snow and fog.

Under the following conditions, the

front side radar sensor cannot detect

target objects or it may be di

cult to

detect them.

Small motorcycles, bicycles,

pedestrians, animals, shopping

carts, and stationary objects on a

road or a road side.

Vehicle shapes which do not

re

fl

ect radar waves well such as

empty trailers with a low vehicle

height and sports cars.

Vehicles are shipped with the

direction of the front side radar

sensor adjusted for each vehicle to a

loaded vehicle condition so that the

front side radar sensor detect

approaching vehicles correctly. If the

direction of the front side radar

sensor has deviated for some reason,

have the vehicle inspected at an

Authorized Mazda Dealer.

For repairs or replacement of the

front side radar sensor, or bumper

repairs, paintwork, and replacement

near the radar sensors, consult an

Authorized Mazda Dealer.

The radar sensors are regulated by

the relevant radio wave laws of the

country in which the vehicle is

driven. If the vehicle is driven

abroad, authorization from the

country in which the vehicle is driven

may be required.

When Driving

i-ACTIVSENSE

4-210

Mazda3_8JM2-EA

-

20H_Edition3_new

2020-12-3 18:39:35

Summary of Contents for 3 Sedan 2020





















































































































































































































































































































































































































































































































































































































































Reviews: