LumaSense SmartDGA, Hardware Manual

Page: 41 / 114

SmartDGA Hardware Manual Valve Installation
•
41
4.3.1 VA-0 Parts and Tools
Ensure you have the following parts and tools on hand prior to starting installation.
Qty Description Part #
1 Mounting Ring (included as part of SmartDGA instrument) 115-0044-01
1 Inline (VA-0) Kit 815-0028-01
1 Adapter, Inline DGA (Inline Adapter) 115-0146-03
1 Plate LTC Adapter (Mounting Plate) 115-0047-01
6 Nut, with Spring (for Mounting Plate) 99-10341
6 Screw, 1/4-20 x 1.25” (for Mounting Plate) 99-10342
6 Washer (for Mounting Plate) 99-10343
1 Tubing 0.25 OD 90 D Elbow (1/4” Elbow Tubing Connector) 115-0191-01
2 Tubing 0.25 OD 1.30”L,Straight (1/4” Straight Tubing Connector)
(Typically only one required)
115-0192-01
1 O-ring, Viton
®
, 3 1/8” ID (Large O-ring) 99-10559
1 O-ring, Viton ® , 1 3/16” ID (Medium O-ring) 90-2378
1 O-ring, Viton
®
, 5/16” ID (Small O-ring) 99-10558
2 Valve, Bleed, SS 1/8” MNPT (1/8” Bleed Valve) 90-2395
1 Female branch tee 1/4” tube (1/4” Female Branch Tee) 99-10086
2 Fitting, Connector 1/4" OD x 1/8" male NPT, SS (1/4” Male Connector) 90-2403
2 Tube Fitting Plug Valve 1/4 (1/4” Shut-Off Plug Valve) 99-10219
2 Tube Fitting Reducer 3/8 x 1/4 (3/8” Tube Reducer) 99-10220
PROVIDED BY CUSTOMER (or ordered separately)
QTY Description
1 NPT Reducer to 1” ID (optional, from LumaSense):
2” to 1” NPT Reducer
1.5” to 1” NPT Reducer
90-2382
90-2381
4 Reducers/adapters as required to convert to 3/8” tubing
Tubing, SS, 3/8” ID (length will vary)
1 NEMA Unistrut Stand (optional, to secure the mounting plate)
2 Soft polymer tubing for bleed valves (3/16” ID, 10 cm L, clear)
1 Tee (stainless steel) and an extra valve (optional, for drain valve)
1 Pipe cutter 1/4’’ to 1/2’’
1 Hacksaw (optional alternative if no pipe cutter is available)
1 Pipe bender 1/4’’ to 1/2’’
1 Wrench, pipe (adjustable 1” to 3”)
1 Wrench, hex 3/16”
1 2-4’’ Channel lock pliers (optional alternative if no pipe wrench is available)
1 Teflon (PTFE) pipe thread sealant tape, 0.0032 inch or greater thickness,
density 1.2 g/cc
1 PTFE containing pipe thread sealant such as:
Leak Lock, Part #HS10001 by Highside Chemicals or
Harvey’s, TFE paste, Part # 023015 or
Rectorseal, Tru-Blu TM Vibration resistant or similar
1 Screw driver, Phillips (#3, 3/16”)
1 Oil cleaner and wiping rag (to clean any potential spills)
3-4 Cotton swabs (to clean grooves for O-rings)
1 Container (at least 3 Liters for waste oil)