LumaSense SmartDGA, Hardware Manual

Page: 50 / 114

SmartDGA Hardware Manual SmartDGA System Installation
•
50
5. Attach a ground wire (or cable) from the ground lug on the bottom dome of the DGA
instrument to a nearby ground (earth ground or to the transformer ground).
6. Proceed to installing additional SmartDGA instruments or the EZHub (section 5.2).
5.2 EZHub
5.2.1 Parts and Tools for the EZHub
Ensure you have the following items on hand prior to starting installation.
PROVIDED BY LUMASENSE – Single Instrument
Qty Description Part #
1 EZHub, LTC (EZ0003) or
EZHub, XFMR (EZ0004) 015-0009-01
015-0007-01
1 Kit, EZHub, LTC or XFMR 915-0030-01
1 Power and Communications Cable DGA-EZHub, STD, 10m 815-0236-01
1 Kit, Conn, 1 Relay, Facility, EZHub 815-0042-01
4 Connector, Relay MC 15/3 47-1407
1 Connector, System RS485 Out 47-1408
1 Connector, Unit RS485 47-1409
1 Connector, Unit Power 47-1410
1 Connector, EZHub Power 47-1411
1 Adapter-Male Micro B to Female A 57-0045
1 Lug Ring, Blue (for power to the EZHub) 95-1970
1 Lug Ring, Red (shield ground for cable to instrument) 90-2249
28 Ferrule (Small Crimp Pins) (You will have extra) 99-10043
3 Ferrule (Large Crimp Pins for EZHub Power Connector) 99-10352
1 Kit, EZHub Mounting Hardware 815-0044-01
8 Screw, Pan Head 6-32X.50
(4 for wall mount or 8 for panel mount)
02615-08SS1
8 Washer, #6, Flat (4 for wall mount or 8 for panel mount) 99-10000
8 Washer, #6, Split (4 for wall mount or 8 for panel mount) 99-39908-100
1 Kit, Bracket, Wall Mount, EZHub 815-0045-01
2 Bracket, Wall Mount 115-0074-01
1 Kit, Bracket, Panel Mount, EZHub 815-0046-01
1 Bracket, EZHub Panel Mount L-Side 115-0087-01
1 Bracket, EZHub Panel Mount R-Side 115-0097-01
1 Kit, Fuse, EZHub (this is a spare) 815-0209-01
1 Kit, USB-ISO-485 / Cable Assembly (RS485 to USB Converter) (used for
connection with a PC)
815-0052-01
Use these holes for
the spanner wrench