LSIS G100, Operation Manual

Page: 124 / 343

Keypad Frequency Setting is Main Frequency and I2 Analog Voltage is Auxiliary
Frequency
•
Main frequency: Keypad (operation frequency 30 Hz)
•
Maximum frequency setting (dr.20): 400 Hz
•
Auxiliary frequency setting (bA.01): I2[Display by percentage(%) or auxiliary
frequency (Hz) depending on the operation setting condition]
•
Auxiliary reference gain setting (bA.03): 50%
•
In.01-32: Factory default output
Example: an input current of 10.4 mA is applied to I2, with the frequency corresponding
to 20 mA of 60 Hz. The table below shows auxiliary frequency A as 24 Hz (=60[Hz] X
{(10.4[mA]-4[mA])/ (20[mA] - 4[mA])} or 40% (=100[%] X {(10.4[mA] - 4[mA])/ (20[mA] -
4[mA])}.
Setting* Calculating final command frequency
0 M[Hz]+(G[%]*A[Hz]) 30 Hz(M)+(50%(G)x24 Hz(A))=42 Hz
1 M[Hz]*(G[%]*A[%]) 30 Hz(M)x(50%(G)x40%(A))=6 Hz
2 M[Hz]/(G[%]*A[%]) 30 Hz(M)/(50%(G)x40%(A))=150 Hz
3 M[Hz]+{M[Hz]*(G[%]*A[%])} 30 Hz(M)+{30[Hz]x(50%(G)x40%(A))}=36 Hz
4
M[Hz]+G[%]*2*(A[%]-
50[%])[Hz]
30 Hz(M)+50%(G)x2x(40%(A)
–50%)x60 Hz=24
Hz
5 M[HZ]*{G[%]*2*(A[%]-50[%])
30 Hz(M)x{50%(G)x2x(40%(A)
–50%)} =
-3 Hz(Reverse)
6 M[HZ]/{G[%]*2*(A[%]-50[%])}
30 Hz(M)/{50%(G)x2x(60%
–40%)} = -300
Hz(Reverse)
7
M[HZ]+M[HZ]*G[%]*2*
(A[%]-50[%])
30 Hz(M)+30 Hz(M)x50%(G)x2x (40%(A)
–50%)=
27 Hz
* M: Main frequency reference/ G: Auxiliary reference gain (%)/ A: Auxiliary
frequency reference (Hz or rpm) or gain (%)
Auxiliary Reference Operation E.g.
#3