Lexmark X925 7541-03 series, Service Manual

Page: 115 / 500

Diagnostic information
2-77
7541-03x
Go Back
Previous
Next
80 Fuser Near Life
Warning • Select Continue to clear the message and continue printing.
•
Show Me
,
View Supplies
, and
Tell Me More
displays additional information.
• Order a replacement fuser. When print quality is reduced, install the new fuser using the
instruction sheet that comes with the replacement fuser.
Note: Be sure to reset the fuser count.
• If this does not fix the problem, replace the RIP board.See “RIP board removal” on
page 4-73 .
80 Fuser Life Warning • Select Continue to clear the message and continue printing.
•
Show Me
,
View Supplies
, and
Tell Me More
displays additional information.
• Order a replacement fuser. When print quality is reduced, install the new fuser using the
instruction sheet that comes with the replacement fuser.
Note: Be sure to reset the fuser count.
• If this does not fix the problem, replace the RIP board. See “RIP board removal” on
page 4-73 .
80 Replace Fuser •
Show Me
,
View Supplies
, and
Tell Me More
displays additional information.
• Replace the fuser. See “Fuser removal” on page 4-61 .
Note: Be sure to reset the fuser count.
• If this does not fix the problem, replace the system board. See “RIP board removal” on
page 4-73 .
80 Fuser Missing Remove power from the printer before continuing or use caution if the product
must be energized during this procedure. The heat sink transformer core
presents risk of electric shock. Test before touching.
• Reinstall the fuser. See.
• Reseat connectors behind fuser. They may get dislodged and not make good contact
when the fuser is installed.
• Check the cable connectors for damage at the system board and at the LVPS.
82 Replace Waste
Toner • Replace the waste toner box using the instruction sheet that comes with the replacement
waste toner box.
• Ensure that there is no interference between the waste toner box and the printer.
• If the problem persists, replace the engine board. See
“Engine board (MDCONT)” on
page 4-92 .
• If the problem persists, contact your next level of service.
82 Waste Toner Missing See “Waste toner bottle missing service check” on page 2-98 .
83. xx ITU Life Warning • Select Continue to clear the message and continue printing.
• Order a replacement transfer module. When print quality is reduced, install the new
transfer module using the instruction sheet that comes with the replacement transfer
module.
• If the problem persists, replace the system board. See “Printhead controller board
removal” on page 4-37 .
83. xx Replace ITU • Replace the transfer module using the instruction sheet that comes with the replacement
transfer module. See “Transfer belt – CRU” on page 4-40 .
• If the problem persists, replace the system board. See “Printhead controller board
removal” on page 4-37 .
83.41 ITU Missing • Check for damage or loose parts on the belt. Replace as needed.
• Clean any dirty connections.
• Try a different belt.
84.11 < color > PC Unit
Life Warning
• Select Ignore to clear the message and continue printing.
• Order the specified photoconductor unit. When print quality is reduced, install the new
specified photoconductor unit using the instruction sheet that comes with the replacement
specified photoconductor unit.
• If the problem persists, replace the system board. See “Printhead controller board
removal” on page 4-37 .
Error code Action