manualshive.com logo in svg

Lexmark X925 7541-03 series, Service Manual

The Lexmark X925 7541-03 series is a high-performance printer designed to meet all your business needs. With our Service Manual, you can easily troubleshoot any issues and perform maintenance tasks hassle-free. Download this invaluable manual for free at manualshive.com and ensure the optimal performance of your Lexmark printer.

Share
Download
background image

 

v

7541-03x

Service checks

 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-45

111.01 Black printhead error   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-45
112.01 Cyan printhead error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-45
113.01 Magenta printhead error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-45
114.01 Yellow printhead error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-45
121.01 Thermistor 1 error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-46
121.02 Thermistor 2 error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-46
121.03 Thermistor 3 3 error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-47
121.04 Belt thermistor error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-47
121.05 Fuser - fuser heater error   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-48
ON / OFF switch automatically switching to the Off position service check  . . . . . . . . . . . . . . .  2-48
126.xx Power switch error   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-48
130.xx High voltage power supply error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-49
132.00 Density sensor error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-49
132.xx Abnormal theta sensor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-50
136.xx Temperature humidity sensor error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-50
140 Drive motor error   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-51
149.01 Fuser / paper exit motor error   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-51
146.01 Tray1error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-52
146.03 Tray 3 error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-52
146.04 Tray 4 error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-53
146.05 Tray 5 error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-54
171.01 Fuser fan error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-54
172.01 - Power supply unit fan error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-55
173.01 - Main unit fan error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-55
174.01 Rear fan error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-55
840.03 service check  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-56
841.00 Invalid configuration or ASIC not found  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-56
841.01 Invalid AFE setting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-56
841.02 Delayed interrupt detected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-57
841.03 Failed indirect register test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-57
841.04 Failed external DRAM test   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-57
841.05 Image pipe time-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-57
841.06 Scanner did not initiate scan  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-58
842.00 No response / 842.01 HW protocol / 842.02 Logical protocol  . . . . . . . . . . . . . . . . . . . . .  2-58
843.00 Carriage Home  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-59
843.03 Pick roll failed to engage   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-59
844.00 Lamp failure (Front side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-60
849.01 Device had modem installed, but config ID indicates it should not  . . . . . . . . . . . . . . . .  2-60
849.10 Device had HD installed, but config ID indicates it should not  . . . . . . . . . . . . . . . . . . . .  2-60
Steps before starting the 9yy service checks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-60

A. Collecting the history information from the SE menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-61
B. Collecting the firmware logs (Fwdebug and logs.tar.gz) from the SE menu . . . . . . . . . . . . .  2-61
C. Collecting the settings from the menu settings page  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-62
D. Collecting information from the user . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-62

900.xx System software error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-63
941.01 SDRAM R/W error   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-66
941.02 MDC error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-66
941.03 CPU error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-66
941.04 MDC controller error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-67
941.05 EEPROM error  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-67
950.00–950.29—EPROM mismatch failure   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-68
959.xx Service invalid firmware error   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-69

User attendance messages

 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-70

User prompts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-70
User attendance messages (0–99)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-73

Other symptoms

 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-79

Print engine   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-79
Scan / copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-80

Summary of Contents for X925 7541-03 series





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for X925 7541-03 series

Samsung M267x series Quick Installation Manual preview
M267x series
Brand: Samsung Pages: 2
Samsung CLX-6220FX Quick Install Manual preview
CLX-6220FX
Brand: Samsung Pages: 2
Samsung CLX-3305FW Manual Del Usuario preview
CLX-3305FW
Brand: Samsung Pages: 341
Samsung CLX-3170 Quick Install Manual preview
CLX-3170
Brand: Samsung Pages: 8
Samsung CLX2160N - Color Laser - All-in-One Manual Del Usuario preview
CLX2160N - Color Laser - All-in-One
Brand: Samsung Pages: 118
Samsung CLX 3160FN - Color Laser - All-in-One Manual Del Usuario preview
CLX 3160FN - Color Laser - All-in-One
Brand: Samsung Pages: 142
Samsung CLP-770ND - Color Laser Printer Quick Install Manual preview
CLP-770ND - Color Laser Printer
Brand: Samsung Pages: 2
Samsung CLP 610ND - Color Laser Printer Manual Del Usuario preview
CLP 610ND - Color Laser Printer
Brand: Samsung Pages: 114
Samsung CLP 500 Instructions Manual preview
CLP 500
Brand: Samsung Pages: 6
Samsung CLP 500 Paigaldusjuhend preview
CLP 500
Brand: Samsung Pages: 15
Samsung CLP 600N - Color Laser Printer User Manual preview
CLP 600N - Color Laser Printer
Brand: Samsung Pages: 227
Samsung CLP 600N - Color Laser Printer Manual Del Usuario preview
CLP 600N - Color Laser Printer
Brand: Samsung Pages: 118
Samsung CLP 300N - Network-ready Color Laser Printer Manual De Usuario preview
CLP 300N - Network-ready Color Laser Printer
Brand: Samsung Pages: 94
Samsung CJX-2000FW Series Quick Install Manual preview
CJX-2000FW Series
Brand: Samsung Pages: 2
Samsung 4116 - SCX B/W Laser User Manual preview
4116 - SCX B/W Laser
Brand: Samsung Pages: 205
Samsung 3561ND - B/W Laser Printer User Manual preview
3561ND - B/W Laser Printer
Brand: Samsung Pages: 252
Samsung 3561ND - B/W Laser Printer Manual Del Usuario preview
3561ND - B/W Laser Printer
Brand: Samsung Pages: 127
Samsung CLX-3305FN User Manual preview
CLX-3305FN
Brand: Samsung Pages: 314

Brands by name

Popular brands

Load more brands